FlexLink YOUTILIZE - Manual (Page 65)

Providing production efficiency
Page 65 of 125
A new node will now appear under ‘Server Nodes Configuration’ in the left side tree structure. On
the right side the Ethernet/IP configuration will be presented. Enter a name for the Configuration
(Description is optional). Select the ‘IP Address’ radio button in ‘Device Settings’ section. Enter the IP
address of the PLC you want to connect to. Then click the ‘Apply’ button in the bottom right corner.
Right click on the created node in the left side tree structure. Select ‘new node’ Æ and select the
‘PLC’ option. Alternatively, select the created tree node and the click the ‘New Node’ button in the
toolbar.