Biamp TesiraFORTE - Manual (Page 3)

2
Step 2
CONNECT TESIRAFORTÉ TO YOUR PC
Connect a USB cable from the TesiraFORTÉ USB connector to
any USB connector on the computer.
When you connect the USB cable to your computer, it should
automatically detect the TesiraFORTÉ, and automatically install
any necessary drivers. Once fully connected, TesiraFORTÉ will
show up as an audio device in Windows.
You can verify this by going to the Sound control panel:
Windows Control Panels Hardware and
Sound Sound.
* Note: TesiraFORTÉ’s USB connector is a
Standard-B type connector. Any computer
that supports USB Audio 1.0 will work with
TesiraFORTÉ, without the need for manually
installing drivers.