Biamp VA-8600c - Manual (Page 11)

10
VA-­8600/VA-­8600c SPECIFICATIONS
AM-­600/600c Card SPECIFICATIONS
Supported Loads: 4ਝߺ 6ਝ, 8ਝߺ70-Volt or 100-Volt Line direct drive Frequency
response:
20 Hz – 20 kHz frequency
response flat +/-1 dB
Continuous operation:
in chassis with fans running
normally and unrestricted
intake and exhaust
600 W: 1 kHz continuous sine wave indefinitely Distortion and
Noise:
ɖ0.3% THD+N (20 Hz – 20k Hz) all
loads and power levels
Signal-to-Noise Ratio:
(unweighted over 22 Hz – 20 kHz)
100W
200W
300W
400W
500W
600W
Low-
impedance 70V 100V
>95 dB >100 dB >101 dB
>98 dB >101 dB >102 dB
>99 dB >101 dB >102 dB
>101 dB >102 dB >103 dB
>102 dB >102 dB >103 dB
>102 dB >103 dB >104 dB
Intermodulation
distortion
(SMPTE):
<0.2%
Inter-channel
Isolation:
>75 dB
(20 Hz-20 kHz, full power out)
DC offset: <10mV
9RFLD$PSOLÀHUF63(&,),&$7,216
Memory: 5.625 MB Power: 110-120 & 220-240VAC 50/60Hz
Inputs: 20 bits, 48 kHz, 5-1/3 ms (fixed) Overall Dimensions:
Height:
Width:
Depth: 5.25 inches (133mm)
19 inches (483mm)
17.25 inches (438mm)
Connection: RJ45 with shielded Ethernet/PoE cable
(CAT5, CAT5e, CAT6, or CAT7)
Weight:
Chassis:
AM 600 card: 50 lbs. (22.68 kg)
1.25 lbs. (0.57 kg)
Total Output Power: 2400W maximum per chassis
(Burst Mode only. Protective thermal limiting
will reduce long-term power output
Compliance: FCC Part 15, class B
CE marked
EN 54-16 certified (VA-8600c)
RoHS Directive
UL 60065 Listed, E215636
C-UL Listed, E215636
C-Tick, N24138 (Australia)
Environment
Ambient Operating
Temperature Range:
Ambient intake humidity:
Altitude:
18-107 degrees F (-8 – 42° C)
0 – 100% non-condensing
0 – 10,000 Feet MSL