Apple Color StyleWriter 2500 - Manual (Page 26)

Here are details about the kinds of materials you can use in your
Color StyleWriter 2500 printer.
Print material Maximum Special instructions
Plain paper 100 sheets m Use 16- to 24-pound paper.
Premium coated paper 50 sheets
m
Use only paper designed for this printer.
m The whiter side should face you.
Premium Plus 50 sheets m Use only paper designed for this printer.
Coated Paper
m
The whiter side should face you.
Glossy paper 20 sheets m Use only paper designed for this printer.
m To prevent misfeeds, put one sheet of plain paper at
the back of the stack.
m
The shinier side should face you.
Transparencies 20 m Use only transparencies designed for this printer.
m The shiny side should face you.
m The edge where the paper and transparency are
joined should point downward.
Back-print film 20 sheets m Use only film designed for this printer.
m To prevent misfeeds, put one sheet of plain paper
at the back of the stack.
m
The chalky side should face you.
Envelopes 15 m Make sure the envelope flap is folded down flat.
Labels 20 sheets
m
To prevent misfeeds, put one sheet of plain paper
at the back of the stack.
m
The labels should face you.
m In the Print dialog box, specify Plain as the paper
type.
The Color StyleWriter 2500 supports only the following sizes of materials:
U.S. Letter, U.S. Legal, A4 Letter, Executive, #6 envelopes, and #10 envelopes.
Don’t attempt to use other size materials, or printing errors may result.
For more information about the kinds of materials you can use with the Color
StyleWriter 2500, see Chapter 3, “Tips on Paper, Quality, Speed, and Cost.”
26 Chapter 2