Alcatel Carrier Internetworking Solutions Alcatel OmniAccess 4324 - Manual (Page 21)

Installing the Chassis 7
Chapter 2
Requirements
Rack Mounting Kit
Using the included rack mounting kit, you can mount the Alcatel Wireless LAN
Switch in a standard 19-inch network equipment rack. The rack mounting kit
contains the following parts:
F IGURE 2-1 Rack Mounting Kit
N OTE —The four 12-24 screws are intended for securing the switch to the rack.
Some racks require different screws which are not included. Verify that you
have the correct screws or fasteners for your rack system before attempting
to mount the switch.
x 4
Left
Bracket Right
Bracket
x 6
6-32 Flat Head
Screws
12-24 Screws