Aquatica EOS 1Ds MK III - Manual (Page 5)

CONTROLS IN DETAIL, CONTINUED
24. QUICK CONTROL KNOB:
Rotates clockwise and counterclockwise. Use alone or in combination with other controls to
select or set various camera functions or modes. In “Manual” exposure this knob controls the aperture or shutter settings (see
camera manual).
25. MOUNTING HOLE FOR ACCESSORY:
a 1/4”-20 TPI hole is supplied to accept a TLC accessory or TLC base ball for
mounting a strobe arm or a modeling light.
26. TOP LCD WINDOW PORT:
Allow the viewing of the top LCD and its information.
27. REMOVABLE VIEWFINDER:
A full view of the illuminated camera viewfinder displays all necessary information. Can be
removed and replaced with optional Aqua View Finder for a larger image
28. MONITOR DISPLAY WINDOW: allow viewing of menus, information and images
29. MOISTURE ALARM WARNING DIODE:
Warning LED will light up in the unlikely event of water penetrating the housing.
30. AF POINT SELECTOR/MAGNIFY BUTTON: Press to select the desired AF points using either the main (#2) or quick (#24)
command dials controls.
31. AF-ON BUTTON:
Press to activate auto focus. This button can be reassigned with custom functions (see section 10 of the
Canon 1Ds Mk III manual)
32. INFO BUTTON: Press to display information on shooting mode, can be used to display histogram in playback mode
33. MENU BUTTON: Press to activate menu display, scroll using either the main (#2) or quick (#24) command dial controls, then
press SET button (#35) to confirm selection.
34 . OK BUTTON: Press to acknowledge selected function.
35. POWER/QUICK CONTROL DIAL SWITCH KNOB: used to power the camera and switch the Quick control dial on.
36. PROTECT/PICTURE STYLE BUTTON: Press to lock an image from deletion or to select picture style in shooting mode.
37. FUNC BUTTON:
Press once or twice to access the various functions allocated to this button (refer to the Canon 1Ds Mk III
manual for further information).
38. DELETE BUTTON: Press to delete images and access the various options associated with this button.
39. PLAYBACK BUTTON: Press to activate the monitor and review images.
40. MOUNTING HOLES:
Three 1/4” X 20 holes are provided for mounting strobes trays or accessories.
41. SACRIFICIAL ANODES:
(2X) zinc anodes are installed to protect your housing against salt water corrosion; theses are
made to deteriorate easier than the other strategic part of your housing, hence the name sacrificial anodes. These anodes
need to be replaced by the user as needed.
42. RUBBER ANTI SKID PADS: Four rubber pads are provided to protect the housing and preventing it from sliding on wet decks.
page 4