Acura 2008 MDX - Manual (Page 293)

CONTINUED
With your phone on and the
ignition in the ACCESSORY (I) or
ON (II) position, press and release
the Talk button. After the beep,
say ‘‘Phone setup.’’ The HFL
response is ‘‘Phone setup options
are status, pair, edit, delete, and
list.’’
Press and release the Talk button.
After the beep, say ‘‘Pair.’’ The
HFL response is ‘‘The pairing
process requires operation of your
mobile phone. For safety, only
perform this function while the
vehicle is stopped. State a four-
digit code for pairing. Note this
code. It will be requested by the
phone.’’
Press and release the Talk button.
After the beep, say the four-digit
code you want to use. For example,
say ‘‘1, 2, 3, 4.’’ The HFL response
is, ‘‘1, 2, 3, 4. Is this correct?’’
HFL does not allow you to pair
your phone if the vehicle is
moving.
For pairing, your phone must be in
its Discovery mode.
Up to six phones can be paired to
the HFL.
The following procedure works for
most phones. If you cannot pair
your phone to the HFL with this
procedure, refer to your phone’s
operating manual, visit
, call
the Hands Free Link consumer
support at (888) 528-7876, or call
your phone retailer. In Canada,
visit or call (888) 9-
ACURA-9.
During the pairing process, turn
off any previously paired phones
before pairing a new phone.
Your Bluetooth compatible phone
with HandsFree Profile must be
paired to the HFL before you can
make and receive hands-free calls.
To confirm that your phone is
Bluetooth compatible, visit
, or call 1-888-
528-7876. In Canada, visit
, or call 1-888-9-ACURA-9. Your
phone retailer should also be able to
confirm that your phone is Bluetooth
compatible.
3.
1.
2.
www.acura.com/handsfreelink
www.acura.ca
www.
acura.com/handsfreelink
www.acura.
ca
Pairing Your Phone
Bluetooth HandsFreeLink
Fe
at
ur
es
287
NOTE: