Burkert Type 8798 - Manual

1 deutsch english français
Type 8691, 8692, 8693,
8694, 8695, 8696,
8798
Important information! Replace puck, see below
Wichtige Information! Puck tauschen siehe Rückseite
Information importante ! Remplacer le rouleau presseur, voir au verso
Typ/ Type 8691, 8692, 8693, 8694, 8798 8695, 8696
Assignment
according to
identification
number
Zuordnung
nach
Identnummer
Affectation
selon le
numéro
d'identification
677246
+
677244
677247
+
677245
Replace puck
Note:
• Always push the supplied
puck onto the switch
spindle of the process
valve.
• If a puck has already been
attached to the process
valve, this puck must be
replaced with the supplied
puck.
• The function of the
controller is guaranteed
only when the correct puck
is used.
NOTE!
To ensure that the controller functions perfectly, the puck which matches the position sensor
must be used. Observe the table above.