Burkert Type 8222 - Manual (Page 2)

4
iNTENDED usE
Use of the display module that does not comply with
the instructions could present risks to people, nearby
installations and the environment.
• The display module is an accessory for the ELEMENT
measuring devices.
• This accessory must be used in compliance with the
characteristics and conditions of commissioning and
use specified in this user manual and in the user manual
of the ELEMENT measuring device.
• Safe and trouble-free operation of the accessory
depends on its proper transport, storage and installation,
as well as careful operation and maintenance.
• Only use the accessory as intended.
Restraints
Observe any existing restraints when the accessory is
exported.
English 5
bAsic sAfETy iNfoRMATioN
This safety information does not take into account:
• any contingencies or occurences that may arise during
assembly, use and maintenance of the devices.
• the local safety regulations that the operator must ensure
the staff in charge of assembly observe.
Various dangerous situations
To avoid injury take care:
• to prevent any unintentional power supply switch on.
• to carry out the installation and maintenance work by
qualified and skilled staff with the appropriate tools.
• to use the accessory only if in perfect working order and
in compliance with the instructions provided in the user
manual and in the measuring device user manual.
• to observe the general technical rules during the planning
and use of the accessory.
• not to use the accessory in a potentially explosive
atmosphere.
English 5
6
gENERAL iNfoRMATioN
Manufacturer’s address and
international contacts
To contact the manufacturer of the accessory use following
address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
The addresses of our international branches can be found
on the last pages of this manual.
Also on the internet at:
www.burkert.com
Warranty conditions
The condition governing the legal warranty is the con-
forming use of the display module in observance of the
operating conditions specified in this manual.
English 7
DEscRipTioN
general description
The display module with navigation button can be used
to read and/or configure the parameters of the measuring
device.
Description of the label
Bürkert 2
00559168
S/N 1017
W43LP
2
3
4
1
1. Display version
2. Order code
3. Serial number
4. Manufacturing code
Version available
The display module is available under order code 559168.
English 7