6 dismounting, 1 dismounting steps, 2 disposal – Burkert Type 8112 User Manual
Page 8
6 Dismounting
6.1 Dismounting steps
Note chapter "Mounting" and carry out the described steps in
reverse order.
If you proceed as follows, it is not necessary to readjust the
switching point and the lock fittings must not be dismounted
completely.
1 Switch off power supply of the sensor
2 Remove all connection cables
3 Loosen lock fitting with a screwdriver
4 Remove the sensor together with the lock fitting
6.2 Disposal
ARV-LS8112.1 consists of materials which can be recycled by
specialised recycling companies. Mark the instrument as
scrap and dispose it according to the national, legal
regulations.
Materials: see chapter "Technical data"
If you cannot dispose of the instrument properly, please
contact us about disposal methods or return.
8
Lock fitting ARV-LS8112.1 - - unpressurised operation
Dismounting
32053
-EN
-070220