Astatic WM-625 - Manual (Page 2)

SPECIFICATIONS FOR WM625 / WM625S
TWO-YEAR LIMITED WARRANTY
Omnitronics, LLC (“ASTATIC”) hereby warrants that this product will be free of defects in
material and workmanship for a period of two years from the date of purchase. In the
unlikely event a defect occurs ASTATIC will, at its option, either repair or replace with a
new unit of equal or greater value. You should retain proof of purchase to validate the
purchase date and return it with any warranty claim. Return warranty claims carefully
packed, insured and prepaid to the Service Department - 341 Harbor St. • Conneaut, OH
44030.
This warranty excludes exterior finish or appearance, damage from abuse, misuse of the
product, use contrary to ASTATIC’s instructions or unauthorized repair. All implied
warranties or merchantability or fitness for a particular purpose are hereby disclaimed and
ASTATIC hereby disclaims liability for incidental, special or consequential damages
resulting from the use or unavailability of this product.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state. Some states do not allow the exclusion or limitation of incidental
or consequential damages or limitations on how long an implied warranty lasts, so the
above exclusions and limitations may not apply to you.
Note: No other warranty, written or oral is authorized by Omnitronics, LLC.
Specifications
Element:
Dynamic
Pattern:
Omnidirectional
Frequency Response:
150 to 4500 Hz
Output Level:
-62 dB (0dB = 1 volt / microbar)
Impedance:
500 ohms
Switch:
DPDT, Push-to-Operate Snap-action switch
Dimensions:
See outline drawing on other side
Weight:
103 grams (3.6 oz.)
Finish:
Brushed Stainless Steel
p/n 46873-45-00 rev1 5/25/04 J.M.S.