ELRO DVR74W 7 tft 4-ch digital recorder + 500Gb hard disc - Manual (Page 22)

- 21 -
1 Static
Select [Static] in the CONNECT NETWORK TYPE, and press [Enter] to enter into the interface as
followings
MEDIA PORT: transfers video data between client and device.
WEB PORT: setup the port of IE browser via HTTP.
IP ADDRESS: setup the IP address, and press [OK] 【+】/【-】 or input numbers to fill IP address.
NETMASK:.press [OK] 【+】/【-】 or input numbers to fill netmask.
GATEWAY: press [OK] 【+】/【-】 or input numbers to fill default gateway.
2 DHCP
Select the DHCP, and enter into the interface as followings.
MEDIA PORT: same as static setup
WEB PORT: same as static setup.
NOTE: restart system when select DHCP, and it will automatically connect with DHCP server. Will allot
IP address when connect is ok and the address will be showed on the interface.
3 PPPoE
Select the PPPOE, and enter the interface as followings:
- 26 -
4.3 User login
Input the DVR local IP in IE browser, if the web port number is set as 80, directly input IP address into IE
address column; If not 80, port number should add behind IP. E.g. when IP is 192.168.0.102, set port is 8088,
http://192.168.0.102:8088 should input.
When the net is connected, IE will automatically download the file to PC as following,
The process will last for 1~2 minutes.
Please click “If your browser does not support the ActiveX to download, please click here”when
downloading is not successful.
System will automatically enter GUI as follows: