ELRO C803IP Plug & Play network camera Full USERS MANUAL - Manual (Page 4)

More Security, More Convenience
1.3 Product Views
1.3.1 Front View
Model 1 Model 2 Model 3
Figure 1.1
1. Sensitive Hole: For light sensitive
2. Infrared LED: For night Vision.
3. LENS: CMOS sensor with fixed focus lens.
4. Antenna: WI-FI Antenna
5. Shell: For protection and waterproof
1.3.2 Rear Panel
Figure 1.2
Network Indicator LED: The green LED will on when connect to the network, the yellow LED will blink when
data transferred
RJ45 Port: RJ-45/10-100 base T, connect the network cable here.
Power Jack: DC 5V/2A power supply
RESET BUTTON: Press and hold the RESET BUTTON for 15 Seconds, then the IPCAM will be reset back to
the factory default Parameter. (Please keep the power on when do RESET)
4