ELRO C706IP_C706WIP Wireless network camera User Manual
Page 13
13
• Check if the LED on the camera alternately flashes red and green. If so, press "next".
Caution! When the camera does not alternately flash green or red:
• Insert the adapter into the power point again.
• Wait 15 seconds and hold the WPS/RSET button for 10 seconds.
• Wait until the LED on the camera alternately flashes red and green.
• Then press "next".
• Wait until the next screen appears and you can see video images. Next, press "next".
• Select the WIFI network you want the camera to connect with.
C
• Enter the password of the WIFI network you have selected twice and press the "OK"
button.
D
Please note! If your router is password protected, you will need to know the password.
• On the next screen, press "OK". The camera is now online and has been added to your
list of cameras.
E
4.2.2. iOS
• Open the "Settings" menu on your iPhone.
• In the menu press "WIFI" and let your phone search for the network "WIFI-cam-p2p".
• Click on the network to connect.
• Download the App "uCare Cam" from the App Store and install it.
• Start the App. The start screen of the app appears.
A
• Press the "Click here to install new wifi Camera" option . The "WiFi connect" menu
appears
B
.
• Press the "Router Mode" button
B1
to add the camera via the WIFI network.
• Click on "next". Next, enter the name of your router and corresponding password and
click on "next".
Please note! If your router is password protected, you will need to know the password.
After the camera has received the information it will restart.
• Click on "next". Now enter the username and password of the camera.
!
Tip: The default username is "admin". The default password is "0000".
The camera will now restart and connect to the router; this may take up to 10 minutes.
Once it is successful, the LED on the camera will be orange.
Caution! If the LED does not turn orange, check if your camera is within the range of
your router. Then complete the above steps again.
• Start the App. The start screen of the app appears.
A
• To connect click on the name of the camera.
4.3. Adding the camera to a new smartphone using a QR
code
Caution! This function only works when the camera has already been added using
another smartphone. Go to section 4.2.2. for Android, and 4.2.2. for iOS.