9pairing a device with the home easy box, 2 sec – ELRO HE840IP Home automation gateway USERS MANUAL User Manual
Page 11
11
9
Pairing a device with the HOME Easy Box
Make sure you have access to your HOME Easy Box. See for more information chapter 6.
Make sure you have added a room. See for more information chapter 7.
Make sure you have added a device to a room. See for more information chapter 8.
To pair a device with the HOME Easy
Box, follow the next steps.
1
Go to Rooms
2
Go to Settings
3
Go to Device Settings
4
Select a room
If you have only one room added, this
room will be selected automatically.
5
Select a device
If you have only one device added, this
device will be selected automatically.
6
Switch your device in the pairing
mode
For example: press the learn button of a
switch for two seconds
7
Click on Learn (HOME Easy Box
interface)
!
Tip: information about how to
switch your device in the pairing
mode, can be found in the
manual of your device).
2 sec
1
2
3
4
5
7