Fluid Components International FC88 KIT - Manual (Page 4)

DOCUMENT NUMBER
08EN000525
SUBJECT
FC88 KIT
CAGE CODE
64818
DATE
10/23/00
SECTION PAGE
4 of 5
REVISION
A
FLEXMASSTER OPERATION
Plug the cord into the FC88 as shown in Figure 3. Plug the other end of the cord into the P1 of the
adapter circuit board Part Number 016932. Plug P2 of the adapter circuit board into the serial
communication connector of the processor board of the FlexMASSter instrument as shown in
Figure 3. The FC88 is ready for use.
FIGURE 3.