Audiovox VR-1 - Manual (Page 6)

Connecting the VR-1;
Tape Monitor Setup
1. Use a set of red and white audio connection cables to
connect the Tape Out of your stereo or home theater
receiver to the INPUT of the VR-1.
2. Use another set of red and white connection cables (not
included) to connect the OUTPUT of the VR-1 to the Tape
Monitor input of your stereo or home theater receiver.
3. Connect the A/C adapter to the DC input of the VR-1.
4. Plug the A/C adapter into a working electrical outlet.
Note: You may need to enable the Tape Monitor feature
on your stereo or home theater receiver. Please check
the owner’s manual of your system to determine how
to do this.
VR-1
3