Fluid Components International ST98 Modbus Module ebloxx A1-1 User Manual
Page 2
Company Headquarters: 1755 La Costa Meadows Drive, San Marcos,
CA 92069-5187
DOCUMENT NUMBER
06EN003371
SUBJECT
Users Guide – ST98 Modbus
CAGE CODE
64818
DATE
02/03/05
SECTION
PAGE
2 of 3
REVISION
-.
3.2 ST98 ADDRESS SETUP
The ST98 MODBUS address setup and Bus speed selection are done is with the use of the
GANTNER "Configuration Software ICP 100" . See opening screen below
On the dialog box "Module Information" the address and Baud rate of the actual E.BLOXX is
displayed. After changing the settings they need to be loaded into the E.BLOXX module, and this
is done by selecting the menu item "Send to Module" or "Send To Module As..." from the menu
"File"
NOTICE OF PROPRIETARY RIGHTS: THIS DOCUMENT CONTAINS CONFIDENTIAL TECHNICAL DATA, INCLUDING TRADE SECRETS AND
PROPRIETY INFORMATION WHICH IS THE PROPERTY OF FLUID COMPONENTS INTERNATIONAL LLC (FCI).