Agilent Technologies DP211 - Manual (Page 40)

User Manual: Family of 8-bit Digitizers Page 40 of 66
3.11.2. Environmental and Physical
The modules have a Declaration of Conformity according to ISO/IEC Guide 22 and EN45014 and CE Marks of
Compliance.
The American Standard MIL-PRF-28800F has been used as the source for many of the characteristics specified
below. Those indicated with a ‘*’ are compatible with Class 3 as defined in that standard.
The front panels of the CompactPCI modules are in compliance with the IEEE 1101.10 standard.
Operating Temperature
0° to 40°C – for the DP1400 and DC271-FAMILY modules
0° to 50°C – all other modules
The above values are for the ambient temperature of the room (or equivalent) where the PC or CompactPCI crate is
located. The temperature as measured on the board may well be significantly higher. On-board temperatures above
60°C should be avoided.
Relative Humidity*
5 to 95% (non-condensing)
Dimensions
All DP modules conform to the PCI standard. The DP214/DP235/DP240 and DP211/DP212/DP111 modules are 107
mm
× 210 mm and require a long card slot. If used with the XP103 fan they can be adjusted to conform to the full
342 mm length. The DP1400 measures 107 mm × 170 mm without its fan. If used with the XP104 fan it can be
adjusted to conform to the full long card length of 342 mm; when the XP105 fan is used the overall length is 235
mm. All other cards require a short card slot (107 mm
× 175 mm). An XP100 fan will add 45 mm to the length of
any card.
The DC110, DC140, and DC135 conform to the 3U CompactPCI standard (100 mm × 160 mm × 20 mm). All other
DC modules conform to the 6U CompactPCI standard (233 mm × 160 mm × 20 mm).
Shock*
30 G, half-sine pulse
Vibration*
5-500 Hz, random
Safety
Complies with EN61010-1
EMC Immunity
Complies with EN61326-1: Industrial Environment
EMC Emissions
Complies with EN61326-1: Class A for radiated emissions
Required Airflow
> 2 m/s in situ