Salton, Inc AC1875ION - Manual (Page 10)

9
USER MAINTENANCE INSTRUCTIONS
Storage
While not in use, turn the dryer off, unplug the hair dryer, allow to
cool completely, and store out of the reach of children in a safe and
dry location. Never store it while it is hot or still plugged in. Never
wrap the cord tightly around the appliance. Never hang the dryer by
the cord. Handle the cord carefully for long life, and avoid jerking,
twisting or straining especially at plug connections.
Maintenance
Attention: Before cleaning or maintenance is done to the dryer, turn
the dryer off and unplug.
Your dryer is virtually maintenance free. No lubrication is needed.
During use, untwist the cord from time to time to avoid tangling.
If any malfunction occurs, do not try to repair it yourself. Unplug the
appliance, allow it to cool and call Consumer Service for examination
and repair (See Warranty Section). This appliance has no user
serviceable parts.
Cleaning the Dryer
Keep all vents and openings clear of dirt or dust. Should dirt or oils
accumulate on the dryer, unplug the unit and wipe the exterior with a
damp cloth. Allow to dry completely before use.
Cleaning the Air Filter and Air Intake Vent
From time to time, check the Air Filter and Air Intake Vent for lint
build up. Cleaning the filter and
vent helps to prevent the dryer
from overheating.
The filter is located at the back of
the dryer. Grasp the filter and turn
counter clockwise until it pulls off
(Fig. A). Use a small cleaning brush
to remove build up from the Air
Filter. Brush off any build up from
the Air Intake Vent while holding the dryer upside down.
Replace the Air Filter by lining up the notches with the grooves on the
dryer. Turn the filter clockwise until it locks in place.
(Opposite of Fig. A) Do not use dryer without the Filter Cover.
Fig. A
Removing the Air
Filter Cover
Air Filter
Cover
Air Intake
Vent