Grace Digital GDI-IRD4000 Allegro - Manual (Page 13)

13
Once powered on, the display on the front of the radio will light up and show:
Grace Digital Radio
After a few seconds, the screen will change to show :
Initializing
Network
After a few seconds, the screen will change to show:
Scan for networks
Enter network
View Config
Edit Config
Step 2 - Scan for a wireless network connection
When the display show <Scan for networks>, press the ‘Select’ button. (NOTE: IF you make an error at
any point, press the ‘Back’ button to return the previous screen)
The ALLEGRO will now scan for all available wireless networks and will display:
Scanning
IIIIIIIIIIIIIIIIIII
IF the radio does not find a wireless network router, the display will show:
No networks
Found
If this happens after subsequent attempts you should setup your wireless access point working - see the
instructions supplied with your wireless network.