Grace Digital GDI-T2USB Tape2USB - Manual (Page 5)

4
metal parts in the tape path.
The pinch roller may be cleaned using rubber cleaning fluid.
Demagnetizing Heads:
Be sure that the power is off, and then demagnetize the heads using a demagnetizer (not included).
For details of demagnetizer use, read instructions included with your demagnetizer.
Listening to a Tape
1. Use the CASSETTE / LINE IN switch and select the CASSETTE position.
2. Plug the RCA Cable into the PLAY OUTPUT jack at the back of the unit, be sure that the red RCA
Cable is inserted into the red jack and the white RCA Cable is inserted into the white jack. Plug the
other ends of the RCA Cable into the auxiliary input (Aux) on your TV, home entertainment receiver or
other music system. Be sure the red RCA Cable is inserted into the red jack and the white RCA Cable
is inserted into the white jack.
3. Press the STOP/EJ button to open the cassette door and insert a cassette tape. Gently close the
cassette compartment door.
4. Press COUNTER RESET button to zero the counter and get ready to count the tape’s
revolutions.
5. Press the PLAY ( ) button.
NOTE: IF the tape is a Cr02 version, select the PLAY Cr02 button first, then press PLAY button.
At the end of the cassette tape,
the cassette will stop automatically.
6. Fast forward and rewind.
Press the fast forward or rewind button to advance and rewind the tape, respectively.