Quick start user guide, Usb & aux-in connections – ECOXGEAR EGRX600-610: ECOROX User Manual
Page 3
Quick Start USER GUIDE
USB CONNECTION & CHARGING
Charge the built-in rechargeable battery via USB cord (included) connected to your computer OR via a USB-to-AC power adapter.
When connected to a power source via the USB connection on the back panel, the Battery LED on the front panel (refer to
Diagram 2.) will indicate the power status. IF not connected to the charging cable, the LED will NOT indicate the power status.
RED LED indicates charging is in progress. A GREEN LED indicates the battery is fully charged.
The Power LED will flash 2 times quickly every 30 seconds when approx. 30 minutes of playtime remain.
NOTE: ECOROX can charge while playing audio
RUBBER CAP, USB POWER & AUX-IN CONNECTIONS
Pull tab on the rubber cap to open the back panel
compartment for access to AUX-IN & USB CHARGING
connections
AUX-IN can be used as an optional connection to play
an audio device using a 3.5mm audio cable
connection.
Connect USB to computer or power outlet using a
USB to AC power adapter
USB & AUX-IN CONNECTIONS
Diagram 3