Grace Digital GDI-IRN1941 Victoria - Manual (Page 15)

15
then:
Network OK
IF the screen displays either WEP or WPA, a password is required:
Enter WEP key
OR
Enter WPA key
Then the network is using one of the encryption systems: Wired Equivalent Privacy (WEP) or WiFi
Protected Access (WPA or WPA2). You therefore need to enter the correct WEP or WPA password on
your NOSTALGIC RADIO to communicate with your network.
Only the person who set up the network in the first place knows this password; if that person is not you
then you need to find out the password. You can do this by checking with the Customer Service of your
internet provider or the manufacturer of your wireless router.
After approximately 3 seconds, the display goes into the password entry mode:
<END ◄ ► A BCDEF>
█
To enter the password, use the Push / Scroll dial to select each letter/number/symbol of the password
in turn, pressing the Push/Scroll dial after each letter.
NOTE: WEP and WPA passwords are UPPER and lower case sensitive and MUST be entered exactly
HINT: Use the ’Back’ button to erase incorrect characters as you may have entered.
IF the display shows: “Invalid key” or “Network Error” an incorrect password has probably been entered.
After entering the final letter/number/symbol, scroll to find and select END and press OK.