Grace Digital GDI-AQRK400 Rock Speaker - Manual (Page 4)

P.3
SPEAKER (RECEIVER)
INSTALLATION
TRANSMITTER
1. Connect the supplied AC power adaptor to an electrical wall outlet.
2. Plug the AC power adaptor (12V/200mA) in the DC jack located on the rear of the transmitter, or
you can insert 4 X “AA” size ALKALINE batteries into the battery compartment of the transmitter with
correct polarity.
3. Turn on the transmitter by set the POWER switch to ON position, and the POWER LED (blue) on
transmitter will start flashing.
4. The retractable audio cord located at the front of transmitter can be connected to audio outputjack
of any audio source such as i-Pod, i-Phone, MP3 handphone, Hi-Fi, MP3/CD/VCD/DVD players etc.