Presetting stations, Sound adjustment – Aiwa CSD-FD99 User Manual

Page 7

Advertising
background image

PRESETTING STATIONS

You can preset up to 15 stations in each band.

1

Select a station.

2

Press s STOP/SET/CLEAR * once so that
“M” is displayed to store the station.

A station is assigned a preset number, beginning
from 1 in consecutive order for each band.

* or s STOP on the remote control

3

Repeat steps 1 and 2.

The next station will not be stored if a total of 15
preset stations have already been stored for a
band.

To listen to preset stations

Select a band then press PRESET or e PLAY/
PAUSE repeatedly.

To select a preset number directly with the
remote control

Press the numbered buttons 0-9 and +10.
Example:
To select number 15, press +10 and 5.
To select number 10, press +10 and 0.

To clear a preset station

Select the preset number first. Within 4 seconds, hold
down s until “M” and the preset number disappear.
The higher numbers in the band are decreased by one.

SOUND ADJUSTMENT

Volume or tone adjustment does not affect
recording.

VOLUME (VOL)

Turn VOLUME on the unit or press VOL i or k on
the remote control. The volume level is displayed
as a number from 0 to 25.

• The volume level is automatically set to 14 if the

power is turned off when the volume level is set
to 15 or more.

• Pressing DISPLAY on the remote control

displays the adjusted volume level.

3-MODE EQ * (equalizer)

Press 3-MODE EQ repeatedly until the desired
mode is displayed.
The equalizer mode changes to R (Rock), P (Pop),
J (Jazz) or no equalization, cyclically.
Rock

- Emphasizes the high and low range of

music.
Pop

- Emphasizes voice and midrange of music.

Jazz

- Emphasizes the low range of music.

* or EQ on the remote control

T-BASS system

The T-BASS system enhances the realism of low-
frequency sound.
Press T-BASS to turn it on or off.

ENGLISH

7

Preset number

Frequency

Advertising
This manual is related to the following products: