Autostart AS-1452 HF User Manual

Page 6

Advertising
background image

P. 6

User Guide

Valet Modes

When your vehicle is in Valet Mode, the remote starter functionalities are disabled. If the

vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine

from being remote-started accidentally.

Valet Mode using the Valet Button

(If installed)

To put the system into Valet Mode:

1. Turn the key to the

IGNITION ON (RUN)

position.

2. Press (for at least 1 second) and release the Valet Button. The L.E.D. will come

ON

.

To take the system out of Valet Mode:

1. Turn the key to the

IGNITION ON (RUN)

position.

2. Press (for at least 1 second) and release the Valet Button. The L.E.D. will go

OUT

.

The Valet button can only be used if the vehicle keys are in the

IGNITION ON (RUN)

position.

Ignition Valet

The system can be placed in Valet Mode to disable the remote starting capabilities. If the

vehicle needs to be serviced, or if you park it indoors, Valet Mode will prevent the engine

from being accidentally started by remote control.

To ENTER Valet Mode

1. With the key in the Ignition switch, turn the key to the

ON (RUN/IGNITION)

and then

OFF

positions 5 times within 10 seconds.

2. The Parking Light will flash 3 times indicating the Module is now in Valet Mode.

The LED will turn

ON

solid.

To EXIT Valet Mode

3. With the key in the Ignition switch, turn the key to the

ON (RUN/IGNITION)

and then

OFF

positions 5 times within 10 seconds.

4. The Parking Light will flash twice indicating the Module is now out of Valet Mode.

The LED will turn

OFF

.

Panic Mode

Note: Panic mode can only be activated if the horn has been adequately configured

by your installer.

In an emergency situation, you can activate Panic Mode using the

LOCK

or

UNLOCK

button.

This will:

• shut down the engine,

• unlock the doors (with the

UNLOCK

button)

• or lock the doors (with the

LOCK

button),

• disarm the Starter Kill and

• activate the horn for

25

sec.

Note: See the description of the Starter Kill option later in this Guide.

To activate Panic Mode:

• Press and hold the

UNLOCK

button for approximately 3 sec. until the sound signal starts

and the parking lights flash: this will unlock the doors before the sound signal starts.

Or press and hold the

LOCK

button for approximately 3 seconds until the sound signal

starts and the parking lights flash: this will lock the doors before the sound signal

starts.

Panic Mode will automatically shut down after

25

sec.

Note: To stop Panic Mode before the end of its delay, press the

LOCK

or

UNLOCK

button

until the sound signal stops.

Advertising
This manual is related to the following products: