Hellwig Sway Bar 6806 User Manual
Page 4
6806 (R-6806)
07/14/04
8
9
10
19.
Bounce the vehicle checking for clearance on all under carriage components: fuel tank, shocks, differential, brake and
fuel lines, etc. Test drive the vehicle and recheck all clearances and the installation alignment. Adjust as needed. Re-check
your installation after one week of driving and periodically on a regular basis.
20.
The sway bars arms have two mounting holes. Mounting the sway bar on the outer hole is the nominal position. For a
firmer setting, use the inner hole. We recommend starting with the outer mounting hole as in photo ( 1 ) until you are
accustomed to the vehicles new handling characteristics. Select the mounting point that best fits your driving style.
ATTENTION INSTALLER:
BE SURE THAT THE CUSTOMER RECEIVES THIS INSTRUCTION
SHEET, ALL IMORTANT NOTE CARDS AND THE WARRANTY FORM
559-734-7451 800-367-5480 FAX 559-734-7460