Hellwig Sway Bar 7218 - Manual (Page 2)

6. With frame bracket & axle plates installed, attach the anti-swaybar on the bottom of the axle plates using the D-bushing &
U-plates. (See picture 3). Orient the hump of the swaybar down & the arms forward towards the front of the coach. Leave
bolts loose enough for adjustment later. Connect the swaybar to the endlink using hardware provided. Center the swaybar
in the U-plate so that the bar lines up with the endlinks. The endlinks should be straight in line with the swaybar at this time.
7. Track bar adapter plate mounts on top of drivers side axle plate with the same 3/8 hardware that secures the u-plate to axle
plate and 1 ½” cap screw. (See picture 4).
8. When satisfied with fit and clearance of all components tighten all hardware to recommended specifications.
ATTENTION INSTALLER: PLEASE MAKE SURE CUSTOMER RECEIVES THIS INSTRUCTION SHEET,
ALL IMPORTANT NOTE CARDS, WARNING CARDS AND THE WARRANTY
FORM.
7218 (R-7218)
3
4
559-734-7451 800-367-5480 FAX 559-734-7460