Setting and starting a programme, Interrupt a programme, Cancel a programme – AEG L 75675 FL User Manual
Page 16: Change a function, Set the delay start, Cancel the delay start, Open the door
SETTING AND STARTING A PROGRAMME
1. Turn the programme knob. The re-
lated programme indicator comes
on.
2. The indicator of button
4
flashes
with red colour.
3. The display shows the default tem-
perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.
4. Set the available functions. The indi-
cator of the set function comes on
or the display shows the related
symbol.
5. Press button
4
to start the pro-
gramme. The indicator of button
4
is on.
INTERRUPT A PROGRAMME
1. Press button
4
. The indicator
flashes.
2. Press button
4
again. The washing
programme continues.
CANCEL A PROGRAMME
1. Press button
1
to cancel the pro-
gramme and to deactivate the ap-
pliance.
2. Press button
1
again to activate
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
CHANGE A FUNCTION
You can change only some functions
before they operate.
1. Press button
4
. The indicator
flashes.
2. Change the function set.
SET THE DELAY START
1. Press button
5
again and again
until the display shows the number
of minutes or hours. The related
symbols comes on.
2. Press button
4
, the appliance
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
Before you press button
4
to
start the appliance, you can can-
cel or change the set of the de-
lay start.
You cannot set the delay start
with the Steam programme.
CANCEL THE DELAY START
1. Press button
4
. The related indi-
cator flashes.
2. Press button
5
again and again
until the display shows 0’.
3. Press button
4
. The programme
starts.
OPEN THE DOOR
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Press button
4
. The door lock
symbol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
button
4
. The programme or the
delay start continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is in
the drum.
16