Hellwig Sway Bar 7868 - Manual

7868 (R-7868) 07/13/2011
INSTALLATION INSTRUCTIONS
Front Stabilizer Bar 7868
1966-77 Ford Bronco
Thank you for purchasing a quality Hellwig Product.
559-734-7451 800-367-5480 FAX 559-734-7460
1
TORQUE TABLE
Bolt Size 3/8”— 35 ft lbs * Bolt Size 7/16”— 45 ft lbs* Bolt Size 1/2”—75 ft lbs *Bolt Size 9/16”—
90 ft lbs
SAFETY : BEFORE BEGINNING INSTALLATION BE SURE TO SET THE PARKING BRAKE
AND CHOCK THE WHEELS.
NOTE: TO EASE INSTALLATION AND PROPERLY ADJUST THE BAR, THE WEIGHT OF
THE VEHICLE MUST BE ON THE SUSPENSION AS IF DRIVING DOWN THE ROAD. DO NOT
RAISE THE VEHICLE BY THE FRAME (Other than to remove the coil spring).
NOTE: THIS KIT REQUIRES DRILLING THE FRAME RAIL AND POSSIBLE
RELOCATION OF FUEL AND BRAKE LINES. INSTALLER MUST ENSURE
THAT THE SWAY BAR KIT WILL NOT INTERFERE WITH ANY FUEL OR
BRAKE LINES OR HOSES.
U-Plate and Bushing
End Link
Sway Bar