Nilfisk-ALTO American 12 - Manual (Page 5)

AMERICAN SANDERS TECHNOLOGY -American 12 Floor Sander Operator's Manual
Page 5
Introduction and Machine Specifications
Operating Controls
Operating Controls
Leveling Adjustment
Tool Storage Tray
Sanding Pressure Adjustment
Motor Starter / Protector
Abrasive Size 12 x 26 1 /
8
(30.5cmx67.3cm) paperback
Contact Wheel Speed 2000/2400 rpm (revolutions per min.)
Abrasive Speed 3796/4555 sfm (surface feet per min.)
Dust Fan Speed 5000 rpm (revolutions per minute)
Dust Fan Flow 280 cfm (cubic feet per minute)
Motor 60 Hz 230V 4hp (3 kW) 50 Hz 240V 3hp (2.2 kW)
Leveling Control Externally Adjustable
Operating Control Adjustable Lever
Motor Starter/Protector Magnetic Circuit Breaker
Sanding Pressure Adjustment Infinitely Adjustable
Wheels (Front) Steel Urethane Steel Urethane
Wheel (Adjustment) Steel Canvas Steel Canvas
Drive V-Belt
Dimensions 40½ x 15 x 36 3 /
4
(102.9cm x 38.1cm x 93.3cm)
Weight 240 lbs. (98 kg)
CAUTION: Your equipment may be inappropriate on some installations. Some softer
woods used in flooring cannot support the pressure created by hard wheels.
A felt or rubber wheel should be used when these woods are encountered.
See parts list for optional wheels.
Always consult with the flooring manufacturer on the proper installation,
preparation, and finishing of their product. Determine suitability of your
equipment in preparing the product.
PART NUMBER 07044C 07108A 07049C 07109A