Hudson Valley Lighting HANOVER 143 User Manual
Page 2
10. Attach the chains to the hooks at the top of the fixture stem.
Attach the ring to the chains.
11. Screw the lower stem into the junction body.
12. Install the lamps ( light bulbs).
NOTE: This fixture is rated for 60 watt type B, BA or CA lamps.
DO NOT EXCEED RECOMMENDED WATTAGE !
13. Place the glass over the stem and into the ring.
14. Thread the glass support and coupling onto the stem to hold the glass in place.
DO NOT OVERTIGHTEN !
15. Screw the extension nipple into the coupling.
16. Place the lower cup onto the extension nipple and install the finial.
12. Restore power to circuit at breaker or fuse box.
040405
Lamp
Ring
Glass
Junction body
Smoke dome
Washer
Washer
Chain
Lower stem
Glass support
Coupling
Lower cup
Extension nipple
Finial