Hudson Valley Lighting MENLO PARK 4036 - Manual (Page 2)

8. Connect the smooth fixture lead to the black wire in the outlet box.
Fasten the joined wires as in step 7.
9. Slide the canopy and screwcollar ring up the chain and secure the canopy to the ceiling.
10. Install the lamp(s) ( light bulb(s).
NOTE: This fixture is rated for 60 watt type B or BA lamps.
DO NOT EXCEED RECOMMENDED WATTAGE !
11. Carefully open the clips in the shades.
Place the shades on the lamps and adjust as necessary
12. Restore power to circuit at breaker or fuse box.
092005
Lamp
Shade
Stem and loop
Fixture body