Hudson Valley Lighting NAUGATUCK 5109-5123 - Manual (Page 2)

8. Remove the ring from the threaded socket. Place the metal shade over the socket and reinstall the ring.
9. Place the glass diffuser into the retaining ring.
Bend the tabs down to hold it in position(to install 5123 the three lites island, please refer to fig. 2 for detail).
10. Install the lamp ( light bulb).
NOTE: The 5109 & 5111 are rated for a 100 watt type A lamp.
5115 is rated for a 150 watt type A lamp. The 5123 is rated for 3-100 watt type A lamp.
DO NOT EXCEED RECOMMENDED WATTAGE !
11. Loosen the 3 latches.
12. Align the locking studs in the shade with the bayonet slots in the ring.
Lift the ring and turn it so that the studs seat in the slots.
13. Lower the latches into position to additionally hold the diffuser and ring in place.
14. Restore power to circuit at breaker or fuse box.
Fig. 2