Hudson Valley Lighting OXFORD 6484 - Manual (Page 2)

8. Connect the smooth fixture lead to the black wire in the outlet box.
Fasten the joined wires as in step 7.
9. Slide the canopy and screwcollar ring up the chain and secure the canopy to the ceiling.
10. Open the latch on the door and install the glass panels.
11. Install the lamps ( light bulbs).
NOTE: This fixture is rated for 60 watt type B, BA, C or CA lamps.
DO NOT EXCEED RECOMMENDED WATTAGE !
12. Restore power to circuit at breaker or fuse box.
042106
Lamp
Latch