Hudson Valley Lighting PORTLAND 8531 - Manual (Page 2)

8. Connect the smooth fixture lead to the black wire in the outlet box.
Fasten the joined wires as in step 7.
9. Slide the canopy and screwcollar ring up the chain and secure the canopy to the ceiling.
10. Remove the 4 barrel head screws from the bottom of the fixture.
Remove the bottom ring of the fixture.
11. Install the lamp ( light bulb). NOTE: This fixture is rated for a 100 watt type A lamp.
DO NOT EXCEED RECOMMENDED WATTAGE !
12. Slide the glass cylinder up into the fixture.
13. Reassemble the bottom ring and barrel head screws to the fixture.
14. Restore power to circuit at breaker or fuse box.
083105
Lamp
Glass cylinder
Barrel head screw
Bottom ring