Hydra-Tech S4TLPAL User Manual

4” hydraulic submersible trash pump, Features, Models s4tlp

Advertising
background image

MODELS
S4TLP

(Ductile Iron Body)

S4TLPAL

(Aluminum Body)

4” (100 mm) Discharge

4” HYDRAULIC SUBMERSIBLE
TRASH PUMP

The S4TLP trash pump is designed to

fit into tighter spaces and can be used

for tank truck mounting for direct

loading/offloading using on-board

hydraulics. It is well suited for operating

with smaller hydraulic tool power units.

Your preference of durable ductile iron

or lightweight aluminum body makes

this pump an all around choice.

FEATURES

2-Vane Channel Impeller

(will pass 3" (75 mm) semi-solids)

Variable Speed hydraulic drive

Wide Range of performance

Can be bolted directly to a tank or truck.

Safe Hydraulic Drive can be used where
electric power is hazardous or impractical

Dependable gear type hydraulic motor

Operates with our HT10 to HT20 power
units or other hydraulic power sources
capable of flows of 5-10 GPM

A1110

167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website

:

www.hydra-tech.com

E-Mail

:

[email protected]

WEIGHT: S4TLP................................ 107 lbs. (48 kg)

S4TLPAL ............................ 68 lbs. (31 kg)

HEIGHT:............................................. 13-3/4” (40 cm)
WIDTH (@ widest point):.................... 19-1/2" (50 cm)
DISCHARGE:.............................................. 4" NPT(F)
INLET FLANGE:................................... 4", 125# ASA
SOLIDS HANDLING:................................ 3" (75 mm)
HOSE PORTS:.................... 7/8-14 UNF (-10) SAE(F)
PUMP BODY: S4TLP................................ Ductile Iron

S4TLPAL............................. Aluminum

IMPELLER:............................................... Ductile Iron
SHAFT SEAL:...................... Grease Lube Double Lip
ELASTOMERS:..................................... Buna N (Std)
HYDRAULIC OIL:..... 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:....................... Max. 10 GPM (38 LPM)
OPERATING PRESSURE:. Max. 2800 PSI (190 Bar)
POWER SOURCE:..

Any Open Center Hydraulic System

SPECIFICATIONS

Specifications are subject to change without notice

Advertising
This manual is related to the following products: