Hydra-Tech S4SCR - Manual

MODEL S4SCR
4” (100 mm) Discharge
4” HYDRAULIC SUBMERSIBLE
CENTRIFUGAL SCREW PUMP
The S4SCR is ideal for pumping high
viscosity liquids such as crude oils, latex,
molasses and refinery wastes using a positive
displacement screw. When pumping lighter
materials, the impeller acts as a centrifugal
type providing high capacity.
FEATURES
E0413
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
: www.hydra-tech.com E-Mail : [email protected]
WEIGHT:.............................................. 54 lbs. (25 kg)
HEIGHT:............................................ 20 3/4" (53 cm)
DIAMETER (@ widest point):............. 11 3/4" (30 cm)
DISCHARGE:............. 4" Camlock or Flange Adaptor
INLET FLANGE:........ 4" 125# ASA or 100 mm metric
SOLIDS HANDLING:................................ 2" (50 mm)
1-1/2" with strainer
HOSE PORTS:........................................ 3/4" JIC (M)
PUMP BODY:............. Seawater Resistant Aluminum
IMPELLER / SCREW:.................... Nodular Cast Iron
SUCTION CASE:............................. Ceramic Coated
ELASTOMERS:......................................... Viton (Std)
HYDRAULIC OIL:.......214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:....................... Max. 12 GPM (45 LPM)
OPERATING PRESSURE:.. Max. 4000 PSI (272 Bar)
POWER SOURCE:..
Any Open Center Hydraulic System
SPECIFICATIONS
Specifications are subject to change without notice
•
Unique Centrifugal Screw Impeller for
pumping of liquids with higher viscosities
•
Small Overall Size allows for use in
confined spaces
•
Oil Lubricated Seals (can run dry)
•
Ceramic coated case for abrasion
resistance
•
Can be used inline as a booster pump
•
Safe Hydraulic Drive can be used where
electric power is hazardous or impractical
•
Operates with our HT15 to HT35 power
units or other hydraulic power sources
capable of flows of 7 - 12 GPM