Hydrotech 7000 Service Manual - Manual (Page 26)

Model 7000
26
Removing Gear Box Assembly
1. Unplug the power source.
2. With 3/8" nut driver, turn the cycle cam counter-clockwise to the position shown in Figure 26 above.
3. Slightly pull the two tabs outward and push the gearbox slightly upward to remove.
4. When returning valve to service after powerhead dissassembly, manually step valve through regeneration
using the extra cycle button until valve is in service.
Figure 26: Removing the Gear Box Assembly
Tabs 41033
40988G