Hydrotech 5600 SE Valve Downflow Automatic Water Softeners Operation Manual - Manual (Page 6)

5
Operating Instructions
Whenever the valve is in Service the current time of day can be set, the control programmed, or an extra
regeneration initiated at any time.
Flow Indicator:
Flashing Dot with Water Flow
P.M. Indicator
Service Indicator:
Valve In Service - Dot On
Extra Cycle Tonight - Flashing Dot
Push either the Up or Down Set Button once to adjust Time of Day Display by one digit.
Push and hold either Up or Down Set Button to adjust Time of Day Display by several digits.
1. Push and hold for 5 seconds both the Up and Down Set Buttons to enter Programming Mode.
2. Push the Extra Cycle Button once per display until all have been viewed and this mode is exited and
normal operation is resumed.
Set Up Button
Program Mode Indicator:
Program Mode Entered - Dot On
Extra Cycle Button
Set Down Button