Airlink101 AGIGAUSB - Manual

Ver. 1A
Package Contents:
•
Gigabit Network Adapter
• USB 2.0 Cable
• Driver CD
• Quick Installation Guide
Note: Do not connect the USB 2.0 Gigabit Network Adapter to your computer
until you’ve reached the appointed step. If the Gigabit Adapter is connected
already, Windows will detect the Adapter and request for a driver. Click Cancel to
quit the wizard and remove the Gigabit Adapter from your computer.
Step 1 Insert the Driver CD into your CD drive and wait for the autorun window to
appear on screen.
Step 2 Click on Install Driver at the autorun window.
Note: If the autorun window doesn’t appear automatically go to Start, Run, and
type D:\autorun.exe (where D is the letter of your CD drive) and click OK.
Section 1
Installation
Quick Installation Guide
Model # AGIGAUSB
USB 2.0 Gigabit Network Adapter
The following steps and screen shots are for Windows XP.
Steps for Windows 2000 are similar unless noted otherwise.
Step 3 Click Next at the welcome screen.