CAME FrogJ-S Kit - Manual (Page 2)

2
ENGLISH
T
h
e d
at
a a
n
d i
n
fo
rm
at
io
n s
h
ow
n i
n
t
h
is
d
ia
lo
g
u
e m
ay b
e c
h
an
g
ed by C
am
e C
an
ce
ll
i A
u
to
m
at
ic
i S
.p
.A
. a
t a
n
y t
im
e w
it
h
o
u
t p
ri
o
r w
ar
ning
.
4.1 Gate Operator
4 Description
2.1 Intended use
1 Legend of symbols
This symbol tells you to read the section with particular care.
This symbol tells you that the sections concern safety issues.
This symbol tells you what to say to the end-users.
2 Intended use and application
The FROG-J operator is designed to automate swing gates used in residential or condominium settings.
The use of this product for purposes other than those described above and installation executed in a manner other than
as instructed in this technical manual are prohibited.
3 Reference Standards
“IMPORTANT INSTALLATION, SAFETY INSTRUCTIONS”
“CAUTION: IMPROPER INSTALLATION MAY CAUSE SERIOUS DAMAGE, FOLLOW ALL INSTALLATION INSTRUCTIONS CAREFULLY”
“THIS MANUAL IS ONLY FOR PROFESSIONAL OR QUALIFIED INSTALLERS”
2.2 Application
This product is engineered and manufactured by CAME cancelli automatici s.p.a. and complies with current safety regulations.
Guaranteed 24 months if not tampered with.
The main component parts of the operator are a foundation casing, a release group, a gearmotor and a transmission arm.
The foundation casing is made of 1.5 mm thick ABS plastic on the sides and of 4mm galvanised steel on the bottom plate. Inside
is housed the release group with custom key for manually releasing the operator. The gearmotor, is made of cast aluminium in
which works an irreversible, gear-ratio and, endless screw and helical crown system.
4.2 Technical features
FROG J
Control board power supply: 230 A.C. 50/60Hz
Motor power supply: 24V D.C. 50/60Hz
Max draw: 10 A
Nominal voltage: 240W
Max Torque.: 260N
Opening time (90°): 15 s
Gear ratio: 1/1396,5
Duty cycle: Intensive use
Protection Rating: IP67
Weight: .. kg
Insulation rating:
—#
—#
For intensive use and condominiums: max weight of the gate 200kg, and max length 1.8m.
The company: CAME Cancelli Automatici s.p.a. is ISO 9001:2000 quality certified; is has also obtained the ISO 14001 environ-
mental safeguarding certification. Came engineers and manufactures all of its products in Italy.
This product complies with the following standards: EN 12978, UNI EN 954-1, CEI EN 60335-1, UNI EN 12453.