CAME RBM21 - Manual (Page 9)

pag. 9 di 19
06/2003
n° doc. - 319T24
rev. -2.0
TO BEGIN
- Preliminary
operations
- Configure a new
system or modify an
existing one
- Configuration
windows
SYSTEM CONFIGURATION
- System
configuration
window
- Normal type of
entrance
- “Double” type of
entrance
- Time span
- APB time
- Number of users
- Traffic light
- Password
- Relay control
USERS CONFIGURATION
- User configuration
window
- Displaying users
- New user
- Master Card
- Prepaid
- Credit management
- APB
- Outputs
PRINTS
Configurations printout
RBM21
1 2
1
2 1
2
1 2
The default password is 123; to change it, select and enter a
number between 1 and 500.
In this area you may control opening of the relay at any time:
it is a system safety function that allows control of the devices
connected to relays 1 and 2 in case it is required (loss of
Card, emergency entrances or exits, etc).
After having connected a traffic light to the
PARKING terminals, it must first be activated
in the
Traffic light area and then enter the
number of places available (not over 500,
which is the maximum number of Cards
managed by the system).
To check the number of users present in the
system, open the
System Configuration
window and then carry out an Rbm21
reading.
Please note: to control users via the traffic light, it is
necessary to enable the AntipassBack in I/O mode
(see
USERS CONFIGURATION > APB ).
Master Cards do not increase/decrease the count.
Traffic light
Password
Relay control