Clear-Com RS-602 (No longer available) - Manual (Page 11)

7
R S - 6 0 2 / 6 2 2 B E L T P A C K
Talk Buttons, Channels A and B
To talk on an intercom channel, press and hold that
channel’s talk button while speaking into the
microphone in your headset. While you hold the
button, your voice transmits to the intercom channel.
When you release the button, your voice no longer
transmits to the intercom channel.
To “latch” a talk button “on” for hands-free use, quickly
tap the button twice. To unlatch the talk button, press
the button again.
With the V-Pack programming software, you can
program a talk button to latch with a single or double
tap, or not to latch at all. See “Customizing Your
Beltpack” for more information.
Call Lights, Channels A and B
A channel’s call light illuminates when you send or
receive a call signal on that channel.
Some onboard and computer programming options can
change the function of this light. See “Customizing
Your Beltpack” for more information.
2
3