Clear-Com HLI-FBS - Manual (Page 24)

Key to Speaker Station front panel
Feature Description
A
Tilt adjustable display screen. The following default information is displayed:
• The channel label.
• The channel listen (volume) level.
For a full description of the display screen information, see Table 2-5
MainStation/Remote Station display icons and indicators.
In Menu mode, the display screens display the four levels of menu. The menu
hierarchy proceeds left to right:
• The top level menu is presented in the first screen (furthest left on the
front panel).
• The lowest level menu is presented in the fourth screen (furthest right on
the front panel).
If the display is in Menu mode, the display screen times out of Menu mode and
displays the channel label if no key is pressed for 20 seconds.
For more information about Menu mode, see 4.1 Using the Menus.
B
Rotary control. Turn to increase or decrease the listen volume level for the
channel, or to scroll menu items when in menu mode. To select menu items,
push the control.
C
Talk key. Press to talk on the channel and to all nodes (intercom devices and
systems) listening into the channel.
D
Loudspeaker / Headphone audio level rotary control [Main]. To increase the
volume to the loudspeaker / headphones, turn clockwise (up to 360°). To
decrease the volume, turn anticlockwise (up to 360°). As you increase or
decrease the volume, the level control LEDs pass through a range of indicator
colors. For more information, see Table 2-2 : Volume Indicator colors
E
Program feed audio level rotary control [PGM]. To increase the volume of
the program feed to the loudspeaker / headphones, turn clockwise (up to 360°).
To decrease the volume, turn anticlockwise (up to 360°).
F
Call key. Press to send a call signal to all nodes (intercom devices and
systems) listening into the channel. There are two Call keys on the beltpack,
one for each of the displayed channels.
G
Headset socket (4-pin XLR–M)
Pin
Function
1
Mic ground
2 Mic positive
3
Earphone ground
4 Earphone positive
Table 2-23 : Headset socket pin out
H
Headset/microphone key set. There is a keyset (set of controls) to control the
headset/microphone inputs and menu options. See Figure 2-6 Speaker Station
keyset.
I
Gooseneck microphone connector (3-pin female Tuchel connector)
Table 2-24 Key to Speaker Station front panel
24 HelixNet Partyline User Guide