Clear-Com HME DX200 - Manual (Page 3)

3
Headset band
Hold microphone
boom here to adjust
microphone position.
OPERATION
Wearing the Headset
Attach the Headset Band to the Headset (Optional)
Locate the white, elastic headset band enclosed with the WH200. Stretch the large loop at
one end of the band over the headset earpiece as shown at #1 in Figure 4. Stretch the
small hole in the opposite end of the headset band over the “button” at the bottom of the
battery holder on the other end of the headset as shown at #2 in Figure 4.
Adjust the Headset to Your Head Size
You can adjust the head size of WH200 for best
fit. Adjustments are made by sliding the adjuster
behind the battery holder as show in Figure 5.
The adjuster slides on a track to fit almost any
head size.
Put the Headset on
• The headset can be worn
with the microphone and
controls on either side of
your head.
• Put the headset on your
head, with the headset band
behind your neck as shown
in Figure 6.
• Hold the microphone boom
at its base and adjust it so
the microphone is near the
side of your mouth and you
can see its tip out of the
corner of your eye.
1
2
Headset band Battery holder Headset earpiece
Figure 4. Headset band attachment
Figure 5. Headset size adjustment
Adjuster
Figure 6. Correct wearing of the headset