Hach-Lange SPECTRO COLOR d-8 - Manual (Page 25)

BDA 387/2
26
C6 Printer
All measuring and calibration values can be documented with an optional Hach Lange printer.
There are two types of prints, i.e. protocol and memory print. In the protocol print, all values
are printed at once. In the memory print, however, the entire memory is printed. The print-
out shows measurings, number of the measurement and identification of the measuring
values.
Calibration LMG183 V 2.01 12.02.2001 16:10
D65/10° d/8°
Calibration Standard no. 10xxxx
black X= x.xx Y= x.xx Z= x.xx
white X= xx.xx Y= xx.xx Y= xx.xx
Colour measurement
e.g.: CIE- L*a*b*
L* a* b*
SPIN xxx.xx ±xx.xx ±xx.xx
SPIN xxx.xx ±xx.xx ±xx.xx
Colour difference
z.B.: CIE-dE*
reference
L* a* b*
xxx.xx ±xx.xx ±xx.xx
dE* dL* da* db* Mi
x.xx ±x.xx ±x.xx ±x.xx x.xx
x.xx ±x.xx ±x.xx ±x.xx x.xx
Key M .
Key Cl .
Mean value
Standard deviation
Coefficient of
variability dE* dL* da* db* Mi
x.xx ±x.xx ±x.xx ±x.xx x.xx
x.xx ±x.xx ±x.xx ±x.xx x.xx
x.xx ±x.xx ±x.xx ±x.xx x.xx
x.xx ±x.xx ±x.xx ±x.xx x.xx
Value deleted
x.xx ±x.xx ±x.xx ±x.xx x.xx
x.xx ±x.xx ±x.xx ±x.xx x.xx
Statistic (5 measurements)
MW x.xx ±x.xx ±x.xx ±x.xx x.xx
STD x.xx ±x.xx ±x.xx ±x.xx x.xx
VAR x.xx ±x.xx ±x.xx ±x.xx x.xx
Connection of a Hach Lange printer
To connect the printer proceed as follows:
• Connect 4-pole plug of the connection cable to the printer.
• Plug the other end of the cable into the spectro-color
®
socket (fig. 3, item 3).
• Turn printer and spectro-color ® on.
Note: If you want no print, unplug the printer cable from spectro-color ® !