Hach-Lange HQ Series Portable Meters - Manual

1
DOC306.53.00780 Instruction Sheet
USB Installation and Operation
Safety
To ensure that the protection provided by this equipment is not impaired, do not use or install
this equipment in any manner other than that specified in this document
.
Transferring data
Note: If the response time is slow when transferring data, reformat the flash memory stick or computer to
use the file allocation table (FAT 16 or 32) format.
Data can be transferred to a printer, flash memory stick or printer using the USB connector on
the HQd USB/DC adapter. The meter must be powered up after being connected to AC power
for data transfer to occur.
This symbol, if noted on the instrument, references the instruction manual for operation and/or safety information.
Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12
August 2005. In conformity with European local and national regulations (EU Directive 2002/96/EC), European
electrical equipment users must now return old or end-of life equipment to the Producer for disposal at no charge to
the user.
Note: For return for recycling, please contact the equipment producer or supplier for instructions on how to return
end-of-life equipment, producer-supplied electrical accessories, and all auxiliary items for proper disposal.
Figure 1 Components for HQ Meter Software Upgrade
1 AC-DC Power Supply 4 Personal Computer Port
2 Power Cord 5 Flash Upgrade Port
3 USB/DC Power Adapter