Hach-Lange POLYMETRON 9245 User Manual User Manual
Polymetron model 9245 sodium analyzer
Advertising
Table of contents
Document Outline
- Section 1 General Information
- Section 2 Specifications
- Section 3 Analyzer Overview
- Section 4 Installation
- 4.1 Analyzer inspection and unpacking
- 4.2 Instrument preparation
- 4.3 Instrument mounting
- 4.4 Step-by-step installation
- 4.4.1 Mains power connection
- 4.4.2 RS485 connection
- 4.4.3 Input/Output connections
- 4.4.4 Sample tubes installation
- 4.4.5 Reagents installation
- 4.4.6 Magnetic stirrer installation
- 4.4.7 Reagents volume declaration
- 4.4.8 Flow rate adjustment
- 4.4.9 Sample pH conditioning check
- 4.4.10 Reference electrode installation
- 4.4.11 Sodium ion selective electrode installation
- 4.4.12 Fill electrolyte reservoir
- 4.5 Analyzer stabilization
- 4.6 Analyzer setup
- Section 5 Operating Instructions
- Section 6 System Setup
- Section 7 User Setup
- Section 8 Calibration
- Section 9 Maintenance and Diagnostics
- 9.1 Maintenance schedule
- 9.2 Battery replacement
- 9.3 Fuse replacement
- 9.4 Cleaning and decontamination
- 9.5 Maintenance and diagnostics menu option
- 9.6 Maintenance and diagnostics - Menu overview
- 9.7 Reagent changes
- 9.8 Calibration diagnostics
- 9.9 Raw values
- 9.10 Test accessories
- 9.11 Sensor reactivation
- 9.12 Extended stop
- 9.13 Startup
- 9.14 Software versions
- Section 10 Troubleshooting
- Section 11 Spare Parts and Accessories
- Section 12 Default Configuration
- Section 13 Reagent Preparation
- Section 14 Material Safety Data Sheets (MSDS)